Product Information; Product Description; Sfliplock Drive And Sfliplock E-Drive; Additional Features - Assa Abloy MSL sFlipLock drive Assembly And Operating Instructions Manual

Table of Contents

Available languages

For fire doors

For escape route doors

Mechanical self-locking

Product information

The sFlipLock drive and the sFlipLock e-drive (Fig. 1) are panic/security multipoint locking systems with

motorised unlocking, three bolts and three blocking flip latches with noise insulation. Flip latches enable

the door to be opened even under high initial loads.

On being unlocked, the deadbolts are retracted mechanically or motor-driven and then the flip latches are

released.

In combination with the evaluation control system (AWS) or the buffer condenser, the lock is suitable for

fire protection and smoke doors.

The lock is tested according to EN 179 and EN 1125 and can be implemented in combination with the

tested fittings, hinges and emergency exit doors or panic doors.

The lock's mechanical self-locking feature is activated when the door is closed and guarantees automatic

locking at all times ("Self-locking function", page 47).

· Equipped with an integrated motor control system for the basic open and close functions.

· Motorised unlocking via an electrical impulse or motorised coupling and decoupling of the outside lever

handle, for example via finger scanner or RFID card reader.

· Mechanical self-locking with automatic sequence control.

· Burglar resistant due to single-turn bolt extension of 20 mm. Tested to RC2 in suitable door element.

· Approved for fire doors and smoke doors when used with evaluation control system or a buffer

capacitor

· Tested for doors with emergency exit locks according to DIN EN 179 and doors with panic door closures

according to EN 1125.

· Suitable for rotary cylinders and free-wheel cylinders. Not suitable for external bolt contacts.

Product information

Table of Contents

Table of Contents