Product Information; Product Description; Sfliplock Check; Additional Features - Assa Abloy MSL sFlipLock check Assembly And Operating Instructions Manual

Available languages

For fire doors

For escape route doors

Mechanical self-locking

Product information

The sFlipLock check (Fig. 1) is a panic/security/multipoint locking system with mechanical unlocking,

integrated status feedback, three bolts and three flip latches with noise insulation. Flip latches enable the

door to be opened even under high initial loads.

The lock can be retracted mechanically during unlocking and then the flip latch is then released.

The lock is suitable for fire doors and smoke doors except product 24574PE-SV-TF.

The lock is tested according to EN 179 and EN 1125 and can be used on emergency exit doors or panic

doors in combination with the tested fittings.

The lock's mechanical self-locking feature (all products with SV designations) is activated when the door is

closed and guarantees automatic locking at all times ("Self-locking function", page 45).

· Monitoring and feedback of the lock status.

· Day function can be mechanically activated

· Mechanical self-locking with automatic sequence control.

· Burglar resistant due to single-turn bolt extension of 20 mm. Tested to RC3 in suitable door element.

· The lock is suitable for fire doors and smoke doors except product 24574PE-SV-TF.

· Tested for doors with emergency exit locks according to EN 179 and doors with panic door locks accord-

ing to EN 1125.

· Suitable for rotary cylinders and free-wheel cylinders. Not suitable for external bolt contacts for self-

locking products.

Product information

Table of Contents