PROAIM CINEMA Series Assembly Manual page 2

Victor Cart Setup

Open all the 4 locks of Trolley to take out all
the parts, as shown in image.

Unlock 4 Pneumatic Wheels and slide onto
Trolley's Bottom Shelf, as shown in image.

After sliding the wheels, lock them with the
knob on top.
NOTE: To keep the dolly in static position, lock
the wheels by pushing down the lever.

Now insert all the 4 Rods into 4 corners of
Bottom Shelf. Tighten the knobs properly to
secure them.

Finally, mount Top Shelf of Trolley onto Rods
and tighten the knobs accurately, as shown in
image.
Note: Two people are required to set the top
shelf on the rods.
2