General Description; Overview - Federal Signal Corporation Informer15 Description, Specifications, Installation, Operation, And Service Manual

General Description

General Description

Overview

The Informer15 Speaker is a 15-watt, IP-enabled indoor and outdoor speaker that can be
used in hazardous (classified) locations. Use the Informer15 as a warning and alert device
with both audible and visual indicators. The audible capabilities include locally stored,
high-quality, high-powered tones and voice messages. The visual indicators include an
integrated high-powered LED light and an optional scrolling message display that can
be controlled by the Informer15. The Informer15 can be equipped with up to four local
initiation devices (switches) to activate the unit locally and to the Commander ® controller
for mass notification communications.
The Informer15 Speaker has an internal 15-watt amplifier/driver to deliver tone warnings
and intelligible voice messages from Informer15 stored memory. The Informer15 also has
several unique capabilities when working with the Federal Signal Commander software.
Using Commander software, the Informer15 can play text-to-speech, stream WAV files, or
broadcast live PA. Commander software can perform a talk/listen to individual Informer15s
to allow callbox type communications. The Informer15 also has remote volume control for
optimizing sound levels across your alerting area. Remote volume control also includes an
ambient-noise-monitoring capability to automatically adjust volume depending on external
noise levels.
The Informer15 can be programmed and configured as a standalone device to only use
the inputs to activate the Informer15. This may be useful if the location has no network
connectivity but where voice and tone alerts from locally activated inputs are required.
The Informer15 can be networked later, and the activations can be brought into the
Commander system for full system capability. When the Informer15 is networked using
the Commander software, alerts initiated at the Informer15 can be used to activate other
devices. The Commander software system can also alert emergency personnel via email,
SMS, and handheld radios using optional messaging software.
The Informer15 includes one output to control the visual indicator and an output to
activate a suitably listed external relay, which can be used to control external devices.
The Informer15 has two 1/2-inch NPT openings on the bottom of the speaker for simple
installation of pipe-mount devices. The openings allow access to LAN, open collector
output, and activation inputs. The Commander system allows multiple configurations for
activation of the open collector output or visual indicator during alerts.
The Informer15 is designed for outdoor use and large indoor structures. A 24 Vdc and
a POE+ model are available. The POE+ version of the Informer15 obtains its operating
voltage solely from a POE+ (IEEE 802.3at) network switch or power injector. No other
AC or DC power is required for the integrated speaker or light. All wiring interfaces
are accessible via internal connectors and built-in NPT entrances for quick and easy
installation.
The Informer15 Speaker is a perfect addition to existing notification systems where lack of
coverage exists. The unit can be used as a call station where emergency alert buttons are
required.
See the Informer-IP Series C Setup, Program, and User Manual (part number 25500395
revision C or later) to learn how to set up, configure, program, and use Informer-IP
devices.
8
Informer15 Speaker (Model I-IP15X Series C)
Federal Signal www.fedsig.com