Care And Maintenance Instructions; Emptying The Bin; Cleaning The Filter - iRobot Roomba i6 Owner's Manual

Care and Maintenance

Care and Maintenance Instructions

To keep your robot running at peak performance, perform the
EN
procedures on the following pages.
There are additional instructional videos in the iRobot HOME App.
If you notice the robot picking up less debris from your floor, empty
the bin, clean the filter and clean the brushes.
Part Care Frequency
Bin Wash bin as needed
Filter Clean once a week (twice
a week if you have a pet).
Do not wash.
Full Bin Sensor Clean every 2 weeks
Front Caster Clean every 2 weeks
Wheel
Edge-Sweeping Clean once a month
Brush and (twice a month if you
Multi-Surface have a pet)
Brushes
Sensors and Clean once a month
Charging
Contacts
Note: iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible
wear appears.
5 For more information, visit global.irobot.com

Emptying the Bin

1
Replacement
Frequency*
2
Every 2 months
Every 12 months
Every 12 months
3
Press bin release
button to remove bin.
Open bin door to empty bin.
Place bin back in the robot.

Cleaning the Filter

1
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
2
Remove debris by
tapping the filter against
your trash container.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important: The robot will not run
if the filter is not installed correctly.
Replace the filter every two months.