Table of Contents
Advertisement
ATTENTION! Observe local legislation regarding use of filling device. In some areas it is prohibited to fill from open
water reservoirs (lakes, rivers etc.). It is recommended only to fill from closed reservoirs (mobile water tanks etc.) to
avoid contamination.
Fast filling device (optional equipment)
The Fast Filling Device is operated as follows:
1. Ensure spray liquid tank contains at least 50 litres of water.
2. Remove cover (A) and connect suction hose (B).
3. Turn handle on Pressure Manifold towards Fast Filler. With the
P.T.O. at 540 r/min the pressure gauge should indicate about 10 bar.
4. If water is not seen in the transfer tube, prime by turning valve (C).
5. Keep an eye on the liquid level indicator.
6. Turn handle on Pressure Manifold away from Fast Filler to disconti-
nue filling process.
7. Disconnect suction tube (B) and replace cover (A).
ATTENTION! Turn handle towards operating unit before turning away from Fast Filler in order to avoid peak pressu-
re blowing the safety valve!
WARNING! Do not leave the sprayer whilst filling the tank and keep an eye on the level indicator in order NOT to
overfill the tank.
ATTENTION! Observe local legislation regarding use of filling device. In some areas it is prohibited to fill from open
water reservoirs (lakes, rivers etc.). It is recommended only to fill from closed reservoirs (mobile water tanks etc.) to
avoid contamination.
WARNING! If suction hose/filter is carried on the sprayer during spraying, it can be contaminated by spray drift
which will be transferred to lake/river when filling!
Filling of main tank using QuickFill (optional)
The main tank is filled using the Quick Fill as follows:
1. Turn bottom Suction Manifold valve to "Main Tank".
2. Remove plug from Quick Fill coupler and connect filling hose
from water supply (i.e. overhead fill tank).
3. Turn water supply "On" (so filling hose is pressurized).
4. Turn top Suction Manifold valve towards "Quick Fill" function.
5. Fill tank to desired level. Keep an eye on the level indicator.
6. Turn top Suction Manifold valve "Off" to discontinue filling process.
7. Turn water supply "Off" and remove the filling hose.
8. Replace Quick Fill plug.
5 - Operation
5.5
Advertisement
Table of Contents
