Mounting The Cooker Hood - KKT KOLBE INTEGRA 606 User Manual

Mounting the hood

9. Mounting the cooker hood

1
Measure and carve the hole in the ceiling
according to the chosen range hoods
measurements.
Note: Before carving, check that the
dimensions indicated correspond to
the dimensions of the product.
3
Ceiling
The range hood must be pushed up until the mountings "click" over the construction the
The cooker hood must be pushed upwards until the brackets „click"
range hood is to be mounted in.
over the construction in which the cooker hood is to be mounted.
If the brackets do not „click", they can be brought into position
If the mountings does not "click" they can be pushed in place, b y pressing on the screws
by pressing the screws holding the brackets. To do this, insert a
that holds the mountings. This is done by pushing through the four holes in the co rners of
screwdriver through the four holes in the corners of the cooker hood.
the range hood with a screwdriver.
Note: For horizontal installation, it is advisable to insulate the coo-
Note: when mounting in a horizontal division recommends that the range hood
ker hood to prevent the formation of annoying noises.
is insulated to avoid noise nuisance.
4
38
Click!
4x
2
Push the range hood up into the carved
hole in the ceiling.
Note: Be aware of the way the door of
the range hood is opened before the
range hood is mounted in the ceiling.
Click!
Range hood
5
NOTE: After the adjustment the enclosed
Mounting