Carbon Filters; Lighting; Troubleshooting - KKT KOLBE INTEGRA 606 User Manual

Care and cleaning
• Due to possible fatty deposits on
dishes or the accumulation of food
particles in the mesh, the metal grea-
se filters should be cleaned separately
from dishes and glasses. Highly added
metal grease filters should first be
soaked well in hot rinse water.
• Allow the filter to dry thoroughly and
carefully replace it in the extractor
hood.
• Frequent cleaning or the use of ag-
gressive cleaning agents can cause
color changes of the metal surface.
These have no influence on the filter
function and are not a reason for
complaint.
!
Avoid using alkaline dishwasher
cleaning agents (ph value over 7).

5.2 Carbon filters

Traditional carbon filters (normally
round in shape) can be neither washer
nor regenerated. In normal use and de-
pending on their size, replace every 4 to
6 months. Comply with the relevant ins-
tructions on the package.
original carbon filter
for this model: K606
34
6.

Lighting

!
• The integrated LED lighting may only
be repaired or replaced by qualified
personnel.
• For this purpose, the appliance must
be disconnected from the power
supply.

7. Troubleshooting

If all the following checks fail to remedy
the fault, it is possible you have a more
serious problem.
In no circumstances try to repair the
electronic/electrical components in the
appliance.
Contact your Customer Service.
7.1 Customer service
For technical queries concerning your
appliance please contact the customer
service office of your dealer.
The type and rating plate is located in-
side the appliance (remove the grease
filter)