Opening The Burner; Closing The Burner - Riello RL 70 Installation, Use And Maintenance Instructions

9.3

Opening the burner

Disconnect the electrical supply from the burner
by means of the main system switch.
DANGER
Close the fuel interception tap.
DANGER
Wait for the components in contact with heat
sources to cool down completely.
 Remove screws 1) and withdraw the casing 2).
 Unscrew the screws 3).
 Fit the two extensions 4) supplied with the burner onto the
slide bars 5) (model with 385 mm blast tube).
 Pull part A backward keeping it slightly raised to avoid dam-
aging the disk 6) on blast tube 7).
9.4

Closing the burner

Refit following the steps described but in reverse order; refit all
burner components as they were originally assembled.
After carrying out maintenance, cleaning or
checking operations, reassemble the hood and all
the safety and protection devices of the burner.
2916076
Maintenance
28
GB
D3310
Fig. 32