Table of Contents
Advertisement
Figure 7
1. Clevis Pin
11. Units with removable floorpan weight:
Tighten knob on weight assembly until the weight
is clamped securely to the caster arm.
12. Hook weight plate assembly over the top of the
weight mounting plates and secure with two
hairpins as shown in Figure 8).
Figure 8
1. Weight Plate Assembly
Note: The portions of the UltraVac collection
system that are not bolted to the mower are
designed to be installed or removed in their
entirety. Do Not operate the mower with only a
portion of the UltraVac installed.
2. Hairpin
2. Hairpin
Transporting
Transporting the Machine
Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary lighting and marking as required by law.
Thoroughly read all of the safety instructions.
Knowing this information could help you, your
family, pets, or bystanders avoid injury.
To transport the machine:
• Lock the brake and block the wheels.
• Be sure the fuel shut-off valve is closed.
• Securely fasten the machine to the trailer or truck
with straps, chains, cable, or ropes.
• Secure a trailer to the towing vehicle with safety
chains.
WARNING
Driving on the street or roadway without turn
signals, lights, reflective markings, or a slow
moving vehicle emblem is dangerous and can
lead to accidents causing personal injury.
Do not drive machine on a public street or
roadway.
Loading a Machine
Do Not transport the machine with the hopper
full. Empty the hopper before attempting to load
machine on trailer or truck. This will reduce the
chance of rearward tip up.
Use extreme caution when loading or unloading
machines onto a trailer or a truck. Use a full-width
ramp that is wider than the machine for this
procedure. Back up ramps and drive forward down
ramps (Figure 9).
1. Back up ramps
15
Operation
Figure 9
2. Drive forward down
ramps
g028043
Advertisement
Table of Contents
