Transporting - Exmark Ultra Vac QDS Lazer Z HP Operator's Manual

4.3.7. Re-install the plastic belt cover and tighten the knobs.
4.3.8. Remove the hair pins and clevis pins holding the hopper assembly to the mount
weldment.
4.3.9. Lift the bag hopper assembly off the mount.
4.3.10. Remove the hairpins and lift the front weight(s) off of the mount plates.
Note: The portions of the Ultra Vac QDS bagger that are not bolted to the mower
are designed to be installed or removed in their entirety. Do not operate the
mower with only a portion of the Ultra Vac QDS installed.
4.3.11. The machine can now be used for side discharge mowing.

4.4 TRANSPORTING

4.4.1 Transporting a Unit: Use a heavy-duty trailer or truck to transport the machine. Lock
brake and block wheels. Securely fasten the machine to the trailer or truck with
straps, chains, cable, or ropes. Be sure that the trailer or truck has all necessary
lighting and marking as required by law. Secure a trailer with a safety chain.
POTENTIAL HAZARD
♦ This unit does not have proper turn signals, lights, reflective
markings, or a slow moving vehicle emblem. These items
are required to drive on a public street or roadway.
WHAT CAN HAPPEN
♦ Driving on a street or roadway without such equipment is
dangerous and can lead to accidents causing personal injury.
♦ Driving on a street or roadway without such equipment may
also be a violation of State laws and the operator may be
subject to traffic tickets and/or fines.
HOW TO AVOID THE HAZARD
♦ Do not drive a unit on a public street or roadway.
22
FIGURE 11
DISCHARGE CHUTE INSTALLATION
CAUTION
13
21