Cleaning; Clean Muffler And Rear Frame Area; Clean Rear Screen In Hopper; Clean Blower - Exmark ULTRAVAC QUICK DUMP SYSTEM Operator's Manual

Maintenance

Cleaning

Clean Muffler and Rear
Frame Area
Service Interval: Before each use or daily
Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
WARNING
Operating engine parts, especially the muffler,
become extremely hot. Severe burns can occur
on contact and debris, such as leaves, grass,
brush, etc. can catch fire.
• Allow engine parts, especially the muffler, to
cool before touching.
• Remove accumulated debris from muffler and
engine area.
• Install and maintain in working order a
spark arrester before using equipment on
forest-covered, grass-covered, brush-covered
unimproved land.

Clean Rear Screen In Hopper

Service Interval: Before each use or daily
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Open door and remove clippings that are stuck
to the screen.

Clean Blower

Service Interval: Yearly or before storage
Grass build up may cause problems with the impeller
when the unit is put back into operation.
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Remove grass buildup from around the impeller
before placing it in storage.
20