About The Dimension Elite Printer; Components; Highlights; How To Use This Guide - Stratasys Dimension Elite / 768 Site Preparation Manual

ABOUT THE DIMENSION ELITE
PRINTER
The Dimension Elite/768 printers incorporate the latest in innovative technologies to provide you with precise
prototypes from a CAD design. Three-dimensional parts are built by extruding a bead of ABS plastic through a
computer-controlled extrusion head, producing high quality parts that are ready to use immediately after
completion. With two layer resolution settings, you can choose to build a part quickly for design verification, or
you can choose a finer setting for higher quality surface detail.

COMPONENTS

• The Dimension Elite/768 Printer
• Catalyst EX Software Package

HIGHLIGHTS

• Maximum build area of 8 x 8 x 12 inch (203 x 203 x 305 mm)
• User Interface with Display Panel and Keypad

HOW TO USE THIS GUIDE

This guide provides information for selecting an appropriate location for the Dimension Elite/768 printer.
Information of particular importance is presented in one of three formats:
Warning: A WARNING indicates a procedure that may cause injury to an operator
if the procedure is not followed. A WARNING will precede the paragraph of
instruction to which it relates.
Caution: A CAUTION indicates a procedure that may cause damage to equipment
if the procedure is not followed. A CAUTION will precede the paragraph of
instruction to which it relates.
Note: A NOTE is used to highlight a specific point or to provide an operational tip.
While useful, a NOTE does not indicate a procedure that can cause injury or
damage if it is not followed. A NOTE will follow the paragraph of instruction to which
it relates.
1