Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Minebea Intec Mini FLEX
Summary of Contents for Minebea Intec Mini FLEX
- Page 1 Installation Manual Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Translation of the Original Installation Manual 9499 053 24300 Edition 1.5.0 01/29/2020 Minebea Intec GmbH, Meiendorfer Str. 205 A, 22145 Hamburg, Germany Phone: +49.40.67960.303 Fax: +49.40.67960.383...
- Page 2 Any information in this document is subject to change without notice and does not represent a commitment on the part of Minebea Intec unless legally prescribed. This product should only be operated/installed by trained and qualified personnel. In correspondence concerning this product, the type, name, and release number/serial number as well as all license numbers relating to the product have to be cited.
-
Page 3: Table Of Contents
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Table of contents Table of contents Introduction............................3 Read the manual................................. 3 This is what operating instructions look like ......................3 This is what lists look like............................3 This is what menu items and softkeys look like..................... 3 This is what the safety instructions look like...................... - Page 4 Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Table of contents 8.2.1 Lift-off protection ............................23 EN-2 Minebea Intec...
-
Page 5: Introduction
1 Introduction Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Introduction Read the manual Please read this manual carefully and completely before using the product. This manual is part of the product. Keep it in a safe and easily accessible location. -
Page 6: Hotline
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 1 Introduction NOTICE Warning of damage to property and/or the environment. NOTICE indicates that damage to property and/or the environment may occur if appropriate safety measures are not observed. -
Page 7: Safety Instructions
2 Safety instructions Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Safety instructions General notes NOTICE Warning of damage to property and/or the environment. The product was in perfect condition with regard to safety features when it left the factory. -
Page 8: Recommendations For Installation
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 3 Recommendations for installation Recommendations for installation Load cell and constrainer arrangement Examples: Do not constrain this position. Constrainer Load application Possible direction of movement EN-6 Minebea Intec... -
Page 9: Mounting Aid
3 Recommendations for installation Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 To ensure the required free moving space of the weighing facility, a maximum of 3 mounting kits with constrainer may be used to constrain a weighing object. -
Page 10: Additional Lift-Off Protection
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 3 Recommendations for installation Additional lift-off protection To increase the permissible lifting force for the mounting kits with constrainer, an additional lift-off protection can be installed. PR 6012/53S (M12) is provided for use in PR 6012/31. -
Page 11: Specifications
4 Specifications Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 4 Specifications Equipment supplied 4.1.1 Mini FLEX mounting kits PR 6012/01N and PR 6012/01S Description Upper plate Lower plate Screw (2×), spring washer (2×), and washer (2×) for the equipotential bonding... -
Page 12: Mini Flexlock Mounting Kits Pr 6012/31N And Pr 6012/31S
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 4 Specifications 4.1.2 Mini FLEXLOCK mounting kits PR 6012/31N and PR 6012/31S Description Auxiliary mounting plate Upper plate Constrainer with joint head (2×), screwed joint, nut (2×), joint pin (2×), and lo- cking washer (2×) -
Page 13: Mini Flexlock Mounting Kits Pr 6012/41N And Pr 6012/41S
4 Specifications Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 4.1.3 Mini FLEXLOCK mounting kits PR 6012/41N and PR 6012/41S Description Auxiliary mounting plate Upper plate Constrainer with joint head (2×), screwed joint, nut (2×), joint pin (2×), and lo- cking washer (2×) -
Page 14: Dimensions
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 4 Specifications Dimensions PR 6012/01 all dimensions in mm EN-12 Minebea Intec... - Page 15 4 Specifications Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 PR 6012/31 * Right-handed thread, ** Left-handed thread all dimensions in mm PR 6012/41 * Right-handed thread, ** Left-handed thread all dimensions in mm Minebea Intec EN-13...
-
Page 16: Technical Data
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 4 Specifications Technical data Mini FLEX mounting kits PR 6012/01N and PR 6012/01S PR 6012/01N PR 6012/01S Maximum capacity of load cell 500 kg…10 t 500 kg…10 t Permissible horizontal displace- max. -
Page 17: Installation
5 Installation Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Installation Prior to mounting 5.1.1 Preparing the foundation/substructure The foundation for the mounting kit must be horizontal (use spirit level), flat, and rigid for the intended loads. -
Page 18: Tightening Torques
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 5 Installation Tightening torques The corresponding tightening torques are given in the following table. Mounting kit Mounting parts Screws Washer Tightening tor- PR 6012/01N, Upper plate M8-8.8 22 Nm... - Page 19 5 Installation Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 NOTICE Welding or lightning strike current flowing through the cell can damage it. All electrical welding on the weighing system must be finished before mounting the load cells.
-
Page 20: Installing The Mounting Kit And Inserting The Load Cell
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 5 Installation 5.3.2 Installing the mounting kit and inserting the load cell Note: Screw mounting of the upper and lower plates is described below. The operations must be performed at all supporting points (e.g., vessel) of the weighing object. -
Page 21: Check Mounting
5 Installation Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Note: If required, the additional lift off protection PR 6012/53 or PR 6012/54 can be mounted (see Chapter 3.3). This does not apply for PR 6012/01. 5. Position the lifting gear on the weighing object. - Page 22 Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 5 Installation It is essential to check: whether the auxiliary mounting plate has been removed. whether the load cell has been inserted in the mounting kit vertically and without being canted.
-
Page 23: Cleaning
6 Cleaning Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Cleaning The mounting kit is easy to clean. It can be spray-washed with water. For this purpose, spray the water jet from top to bottom and around the mounting kit. -
Page 24: Disposal
Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 7 Disposal Disposal If the packaging is no longer required, please take it to your local waste disposal facility and/or a reputable disposal company or collection point. The packaging largely consists of environmentally friendly materials which can be used as secondary raw materials. -
Page 25: Spare Parts And Options
8 Spare parts and options Mini FLEX and Mini FLEXLOCK mounting kits PR 6012/01, ../31, ../41 Spare parts and options Replacement parts Description Max. capacity Order no. Flexible copper thread, 250 mm long 5312 321 28056 Load disc (for PR 6212/..LT) 500 kg…5 t... - Page 26 Published by Minebea Intec GmbH | Meiendorfer Strasse 205 A | 22145 Hamburg, Germany Phone: +49.40.67960.303 | Email: info@minebea-intec.com www.minebea-intec.com...
Need help?
Do you have a question about the Mini FLEX and is the answer not in the manual?
Questions and answers