Operation Symbols; Quickstart Label Symbols - Champion Power Equipment 100790 Operator's Manual

Table of Contents

Advertisement

100790 - 4200 PSI PRESSURE WAShER

Operation Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
SYMBOL
0° Nozzle
15° Nozzle
25° Nozzle
40° Nozzle
Soap Nozzle

Quickstart Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
Set Up
1
1. Attach wand to trigger gun.
2. Attach high pressure hose to trigger gun.
3. Attach high pressure hose to pump.
2
4. Attach garden hose.
5. Attach nozzle to trigger gun.
3
6. Turn on water supply.
7. Press the trigger for 30 seconds.
4
5
6
7
30 s
2019-L-OP-A
MEANING
IMPORTANT SAfETY INSTRUCTIONS
SYMBOL
8
9
10W-30
11
Starting the Engine
8. Check oil level.
Recommended oil is 10W-30.
9. Move the fuel valve to the "ON" position.
10. Move the choke lever to the "CHOKE" position.
Artwork Notes
3mm corner radius; 2mm safe margin; to be printed
on WHITE substrate.
11. Pull the recoil cord.
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
12. Move the choke lever to "RUN" position.
Stopping the Engine
1. Move the fuel valve to the "OFF" position.
2. Press the engine switch to the "OFF" position.
9
MEANING
Choke/Run
Fuel valve OFF/ON
Fuel Gauge: Full
Fuel Gauge: Empty
Stop
10
1
12
2
LPN
2014-L-OP
Colors
Rev
A
K
376
485
152
CG1
Size
135 x 40 mm
Revision Changes
---

Advertisement

Table of Contents
loading

Table of Contents