Putting A Small Amount Of Oil; Replacing The Oil; Cleaning The Filter Element - KANSAI SPECIAL SX Series Instructions Manual

4-4 Putting a small amount of oil

Put a small amount of oil onto the positions shown in the illustration.

4-5 Replacing the oil

To extend machine life, replace the entire oil after the first 200 hours of operation.
Thereafter replace the oil every 6 months. To drain the oil, remove screw I and J.
< Note >
Contaminated oil may shorten machine life. Replace the oil as early as possible.

4-6 Cleaning the filter element

Before replacing the oil, remove reservoir K and
clean the cylinder, inside of the reservoir and filter
element. Also remove the oil pump and clean the
filter element L. If these parts are contaminated,
proper oiling may not be performed.
4