2
SETUP
(SIX DAYS EU)
–
Mount the turn signal switch and connect the plug-in connector with the wiring
harness.
402148-01
(All XC-W models)
–
Connect pull switch
–
Install the front fender. (
–
Correctly mount the fuel tank breather.
–
Install the front wheel. (
–
Refit the headlight mask with the headlight. (
B01747-11
–
Mount the handlebar cushion.
B02187-01
–
Mount the footrests with the springs and pins. Secure the pins using the washers
and cotter pins.
Pliers for footrest spring (58429083000)
800042-10
(All EXC models)
–
Mount the license plate holder with the license plate lamp, turn signals, and
reflector.
–
Connect the electrical components.
–
Connect the connector of the right turn signal with the connector that is marked
green.
–
Connect the connector of the left turn signal with connector that is marked red.
B00908-01
with the yellow and white cables.
p. 13)
p. 11)
p. 14)
6