3
WORK
3.1
Raising the motorcycle with the lift stand
3.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
3.3
Removing the seat
3.4
Mounting the seat
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels are no longer in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with the
rubber band.
401943-10
–
Remove screw
above.
B00817-10
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower at the rear
and simultaneously push forward.
–
Make sure that the seat is correctly locked in.
602715-01
. Lift up the seat at the rear, pull it back and then remove from
to the ground with your foot and lean
8