3
WORK
3.10
Installing the battery (All 200/250/300 models)
3.11
Installing the front fender
Main work
–
Insert the battery into the battery compartment with the terminals facing to the
front.
(All 200/250/300 EU/AU/US models)
Battery (YTX4L-BS)
(300 EXC BR)
Battery (YTX5L-BS)
–
Attach rubber band
–
Position the positive cable
Guideline
Screw, battery terminal
Info
Contact disks
ets
–
Slide positive terminal cover
B02136-10
–
Position the negative cable
Guideline
Screw, battery terminal
Finishing work
–
Mount the seat. (
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
B02156-10
–
Mount and tighten screws
Guideline
Remaining screws, chassis
B02155-11
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
.
and mount and tighten the screw.
must be mounted between screws
with the claws facing down.
over the positive terminal.
and mount and tighten the screw.
p. 8)
.
p. 14)
M5
2.5 Nm
(1.84 lbf ft)
and cable sock-
M5
2.5 Nm
(1.84 lbf ft)
.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 14)
13