KTM 125 EXC 2015 Setup Instructions page 18

3 WORK
3.18 Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
3.19 Setting the speedometer functions
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
–
Switch off the engine.
–
Open the filler cap. (
–
Fill the fuel tank with fuel up to measurement
Guideline
Measurement of
Total fuel tank
capacity, approx.
(EXC EU,
EXC SIX DAYS,
300 EXC BR)
400382-10
Total fuel tank
capacity, approx.
(EXC AU, XC‑W,
XC-W SIX DAYS)
Engine oil, 2-stroke (
–
Close the filler cap. (
Condition
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
The Setup menu is displayed and the active functions are shown.
–
Repeatedly press the button
Setting the Km/h
–
Press the button
Setting the Mph
–
Press the button
400329-01
–
Wait 3–5 seconds
The settings are stored.
Info
If no button is actuated for 10–12 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Press the button
The Setup menu is displayed and the active functions are shown.
400318-01
p. 15)
35 mm (1.38 in)

9.5 l Super unleaded (95 octane) mixed
(2.51 US gal) with 2-stroke engine oil (1:60)
(
10 l (2.6 US gal) Super unleaded (95 octane) mixed
with 2-stroke engine oil (1:60)
(
p. 19)
p. 15)
briefly until H appears at the bottom right of the
for 2–3 seconds.
briefly until Km/h/Mph flashes.
.
.
briefly until H appears at the bottom right of the
for 2–3 seconds.
 .
p. 19)
p. 19)
16