Toro Spray Master Operator's Manual page 80

Problem
No material dispensed from hopper.
The spray wand does not work.
Possible Cause
1. Hopper screen is plugged.
2. Hopper door not adjusted properly.
1. The sprayer tank is empty.
2. The sprayer-wand-pressure control is
in the wrong position.
3. The wand is clogged or damaged.
4. The spray nozzle for the wand is
clogged.
5. The trigger is not pressed.
6. The hose is clogged or damaged.
7. The hose is not connected to the wand.
8. The hose for the wand is kinked.
80
Corrective Action
1. Clean the hopper screen.
2. Adjust the hopper door; refer to the
Adjusting the Hopper-Door Control
procedure.
1. Fill the sprayer tank.
2. Rotate the pressure control to the
O position.
PEN
3. Clean, repair, or replace the wand.
4. Clean or replace the nozzle.
5. Press the trigger.
6. Clean, repair, or replace the hoses.
7. Connect the hose to the wand.
8. Straighten the kink in the hose.