Usb Options - Kolver EDU 2AE/TOP/NT Manual

- - - - O P T I O N S - M E N U - - - -
6 ) V e r s i o n s
7 ) S e r i a l

8 ) S e t
6) Versions: in this screen you can see the versions of boards mounted inside the unit.
7) Serial number: it is the indication number of the control unit. Default number: 0000000.
It could be the real serial number of the unit or another one you could choose (7 digits max).
This number will also be the name of the folder in the USB drive where you will save the report of
your data (see EDU EXPAND part).
- - - - O P T I O N S - M E N U - - - -
7 ) S e r i a l
 8 ) S e t
9 ) C y c l e s :
8) Set time & date:
to set time and date on the control unit.
9) Cycles
- Total number of cycles: It shows the number of tightened and loosened screws. This number
can't be modified.

USB Options:

- - - - O P T I O N S - M E N U - - - -
 1 ) R e a d
2 ) W r i t e
3 ) I n f o
1) Read USB: press OK and read the USB drive and select the file
The EDU control unit recognizes only files as

O K
Write USB: press OK and create your new
2)
parameters you have set in the control unit.
t i m e
t i m e
U S B
U S B
U S B
S e l e c t P r o g r a m
S E T 0 0 . K OL
c o n f i r m E S C
n . 0 0 0 0 0 0 0 0
& d a t e
n . 0 0 0 0 0 0 0 0
& d a t e
0 0 0 0 0 0 0
SETxx.KOL
SETxx.KOL (see EDU EXPAND part).
q u i t
application where you save all the
SETxx.KOL
you desire.
Page 11