Option Menu; Unit Options - Kolver EDU 2AE/TOP/NT Manual

6) Reset seq.:
When ON, you can reset the Sequence (pushing the Reset button).
7) Aut. res seq- Automatic Reset Sequence:
end of the sequence. When OFF it is necessary to press OK at the end of each sequence.

OPTION MENU:

- - - - - M A I N - M E N U - - - - - -
U n i t

 U S B O p t i o n s

Unit Options:

- - - - O P T I O N - - M E N U - - - -
O K
1 ) L a n g u a g e :

2 ) C h a n g e
1) Language:
This option allows to choose among the languages available: English and Italian.
2) Change password:
You can change password (see point 3).
- - - - O P T I O N - - M E N U - - - -
3 ) P a s s w o r d :
 4 ) E S C - O K - R S T :
5 ) U n i t :
3) Password ON:
When YES, you will be asked for the password to enter the menu. Otherwise select NO.
ATTENTION: Password is only asked to enter the menu the first time after switching the unit on.
The default password is: 0000.
4) ESC-OK-RST:
Press ESC in case of error. Press OK at the end of a program or to reset a sequence or a
program (see point 7: Reset).
When INT, the operator must press the required key on the front panel.
When EXT, functions can only be enabled through proper connections on the back panel (see paragraph I/O
connections).
When INT+EXT you can press either he button on the front or on the back panel.
5) Unit:
You can choose between the following units of measurements: Nm, lbf.in and kgf.cm
When ON, the control unit automatically resets after the
S e q u e n c e
O p t i o n s
c h a n g e
s e t t i n g
E S C q u i t
p a s s w o r d
e x t
I T
o n
N m
Page 10