Editor Auto Start; Editor Timer Start - Thermo Scientific ADVANCED Series Manual

Editor - Auto start

Editor Auto start

is used to enable/disable auto restart. When enabled, the unit will automatically
restart after a power failure or power interruption condition.
1. Use the arrow buttons to highlight
SP1
Editor
Settings
System
Installation
3. Use the arrows to highlight
Setpoints
Ramp Program
Auto start
Timer start
Menu
Editor - Timer start

Editor Timer start

will start/stop using the adjusted values. To set the current time/date see the next page.
1. Press
to toggle between
When enabled highlight the second Timer.
Timer
Timer
Menu
Thermo Scientific
Editor.
Menu
Auto start
.
is used to set the timer and adjust the start/stop times. When enabled, the unit
ON OFF
and
ON
2. Press to display the submenu.
Setpoints
Ramp Program
Auto start
Timer start
Menu
4. Press to display the status.
Auto Start
Menu
5. Press
to toggle between
With the desired setting showing press
Menu
use the window, to save and return to the
previous display.
Timer
2. The second
.
Start Time/Date
Start Time/Date
12:00:00
01/01/2010
Stop Time Date
Menu
Section 4 Operation
ON
ON OFF
and
is used to set the timer
Stop Time/Date
and
.
, or
.
4-13