Running A Ramp Program - Thermo Scientific ADVANCED Series Manual

Running a Ramp Program

NOTE The unit needs to be stopped (refrigeration and pump off) before running a ramp.
CAUTION
SP1
+020.00
+024.29 °C
Internal Temp..
1. Use the arrow keys to highlight the
and press .
SP1
+020.00
+024.29 °C
Internal Temp..
3. Press and the controller will display the
start and pause
start symbol should be highlighted
ramp1
+020.00
+024.29 °C
Internal Temp..
Thermo Scientific
RAMP
Highlighting
unit to go full cold until the ramp is started.
Menu
in
SP
display
MENU
In
program symbols. The
.
MENU
In
, see step 2, with the unit running will cause the
2. Press the up arrow key until the window dis-
RAMP
plays .
RAMP
+020.00
Internal Temp..
4. With the start symbol highlighted, press
to start the program. The start symbol will change
into a highlighted stop program symbol
NOTE With the stop symbol
pressing shuts down the unit.
The program does not start until the process fluid
temperature is at the
Variance
the .
ramp1
+020.00
Internal Temp..
Section 4 Operation

MENU
In
+024.29 °C
highlighted,

Step 1 Start Temp
MENU
In
+024.29 °C
.
±
4-11