Installation - Valor H3 Series Installation Manual

Four-sided backing plate kit. csa approved for use with valor h3 1000 heater models

Hide thumbs Also See for H3 Series:

Available languages

Installation

1. On completion of appliance installation, insert the

backing plate assembly into the liner box, and at-

tach it using 4 screws into the left and right sides.

2. Slide the removable bottom plate into the clips in

the side panels.

3. Insert the left hand door.

a. Insert the door tabs straight into the top and

bottom slots behind the front panel of the plate.

b. Slide the door down to secure it..

4. Repeat for right hand door.

Table of Contents

1040bpb-rc