BenQ EW Series User Manual page 19

Orient and align the stand arm with the monitor, then
push them together until they click and lock into place.
Tighten the screws that fix the stand to the monitor.
To secure or release a screw, a flat-head screwdriver or a
coin is required.
Depending on the monitor size, there may be more than one
screw that fixes the stand to the monitor. The illustrations in
this document are for your reference only and may look
different from the appearance of the product.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
Your monitor is an edge-to-edge monitor and should be
handled with care. Avoid finger pressure on the screen
surface. Excessive force on the display is prohibited.
How to assemble your monitor hardware 19