Installing The Fork Protector; Removing The Fork Legs - KTM 350 EXC-F 2022 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.6
12.7
62

Installing the fork protector

V00332-11

Removing the fork legs

K00545-10
V01756-10
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws .
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
2
tighten screws .
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
Remove the cable ties.
–
2
Remove screws and take off the brake caliper.
–
Hang the brake caliper and the brake line loosely to the side.
–
3
Loosen screws . Take out the left fork leg.
–
4
Loosen screws . Take out the right fork leg.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 113)
p. 60)
( p. 101)