Setting The Clock; Viewing The Lap Time - KTM 350 EXC-F 2022 Owner's Manual

7 COMBINATION INSTRUMENT
7.5
7.6
28

Setting the clock

400330-01

Viewing the lap time

Info
This function can only be opened if lap times have actually been timed.
400321-01
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button for 2–3 seconds.
The hour display flashes.
–
Adjust hour display with the button
–
Wait 3 - 5 seconds.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the
hours by pressing the button
Info
The seconds can only be set to zero.
If no button is pressed for 15-20 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Briefly press the button
LAP 1 appears on the left side of the display.
–
The laps 1–10 can be viewed with the button
–
Press and hold the button
The lap times are deleted.
–
Briefly press the button
Next display mode
Info
When an impulse is received from the wheel speed sen-
sor, the left side of the display changes back to the
SPEED mode.
briefly until CLK appears at the
and/or button .
and the button .
briefly until LAP appears at the
.
.
for 3-5 seconds.
.