KTM 350 EXC-F 2022 Owner's Manual page 91

–
Now inject fluid into the system until it escapes from the
6
opening of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reser-
voir to prevent overflowing.
–
Remove the bleeding syringe. Mount and tighten the bleeder
screw. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
E00339-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Immediately clean up any brake fluid that has over-
flowed or spilled with water.
SERVICE WORK ON THE CHASSIS 12
4 mm (0.16 in)
89