Thermo Scientific TSX Series Installation And Operation Manual page 22

Installation
18 TSX Blood Bank Refrigerators
4. The drawer slide must be removed from the rear pilaster at
approximately a 45 degree angle towards the center of the cabinet.
Figure 7. Slide Rotation
5. Pull the slide towards the front of the cabinet.
6. Determine desired location for the slide and insert the slide into the rear
pilaster at a 45 degree angle towards the center of the cabinet.
7. Once the slide is seated in the rear pilaster, rotate the slide until it is
parallel with the unit wall and insert slide into front pilaster.
Figure 8. Slide Installation
CAUTION: Ensure the slide is level. If the slide is not seated in a level
orientation, the drawers/baskets will not function as intended. This could
cause injury or product damage.
Thermo Scientific