Replacing The System Fan Module - Gigabyte G481-HA0 Service Manual

3-10 Replacing the System FAN Module

CAUTION!
Before you remove or install the system fans follow these steps:
• Make sure the system is not turned on or connected to the AC power..
• Disconnect all necessary cable connections. Failure to observe these warnings could result in
personal injury or damage to the equipment.
Follow these instructions to replace the system fan module:
[For all system fan modules]
1. Grasp the finger slots of the fan module and pull up to remove the fan module.
2. Reverse the previous steps to install the replacement fan module.
System Hardware Installation
FAN #1
FAN #2
1
1
2
FAN #3
FAN #5
FAN #4
FAN #6
- 40 -