Pch Configuration - Gigabyte G481-HA0 Service Manual

5-3-7 PCH Configuration

Parameter
PCH Configuration
PCH SATA Configuration
Description
Press [Enter] to configure advanced items.
SATA Controller
Š
– Enable/Disable SATA controller.
– Options available: Enable/Disable. Default setting is Enable.
Configure SATA as
Š
– Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its
AHCI functionality. Then the RAID function is disabled and cannot
be access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both
its RAID and AHCI functions. You will be allowed to access the
RAID setup utility at boot time.
– Options available: AHCI/RAID. Default setting is AHCI.
Alternate Device ID on RAID
Š
– Enable/Disable Alternate Device ID on RAID mode.
– Options available: Enable/Disable. Default setting is Disabled
– Please note that this option appears when HDD is in RAID Mode.
SATA Port 0/1/2/3/4/5/6/7
Š
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
- 93 -
(Note 1)
BIOS Setup