Replacing The Fan Assembly; Fan Connector Table - Gigabyte R271-Z31 Service Manual

3-8

Replacing the Fan Assembly

Follow these instructions to replace the fan assembly:
NOTE: Before removing the fan, disconnect and unthread the two fan connectors from the server. Refer
to the Fan Connector Table below for proper connection for the fan cables.
1. Lift up the fan assembly from the chassis
2. Reverse the previous steps to install the replacement fan assembly.

3-8-1 Fan Connector Table

Fan No.
1
Fan Cable
4-cable connector
1
2-cable connector
4-cable connector
2
2-cable connector
4-cable connector
3
2-cable connector
4-cable connector
4
2-cable connector
Port Connection
- 33 -
FAN1A
FAN1B
FAN2A
FAN2B
FAN3A
FAN3B
FAN4A
FAN5A
System Hardware Installation