Bmc Network Configuration - Gigabyte G481-HA0 Service Manual

5-4-4 BMC Network Configuration

Parameter
BMC network configuration
Select NCSI and Dedicated
LAN
Lan Channel 1
Configuration Address source
Station IP address
Subnet mask
Router IP address
Station MAC address
Real-time synchronize BMC
network parameter values
BIOS Setup
Description
Switch NCSI and dedicated LAN and send KCS command.
Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3
(Failover).
Default setting is Mode1 (Dedicated).
Select to configure LAN channel parameters statically or dynamically
(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.
Options available: Unspecified/Static/DynamicBmcDhcp. Default setting
is DynamicBmcDhcp.
Displays IP Address information.
Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.
Displays the Router IP Address information.
Displays the MAC Address information.
Press [Enter] to synchronize the BMC network parameter values.
- 106 -