Sio Configuration - Gigabyte G481-HA0 Service Manual

5-2-10 SIO Configuration

Parameter
AMI SIO Driver Version
Super IO Chip Logical
Device(s) Configuration
[*Active*] Serial Port
Description
Displays the AMI SIO driver version information.
Press [Enter] to configure advanced items.
Use This Device
Š
– When set to Enabled allows you to configure the serial port settings.
When set to Disabled, displays no configuration for the serial port.
– Options available: Enabled/Disabled. Default setting is Enabled.
Current:
Š
– Displays the serial port base I/O address and IRQ.
Possible:
Š
– Configures the serial port base I/O address and IRQ.
Use Automatic Settings
IO=3F8h; IRQ=4; DMA;
IO=3F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA;
IO=2F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA;
IO=3E8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA;
IO=2E8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA;
Default setting is Use Automatic Settings.
- 73 - BIOS Setup