Upi Configuration - Gigabyte G481-HA0 Service Manual

5-3-3 UPI Configuration

Parameter
UPI Configuration
UPI General Configuration
Description
Press [Enter] to configure advanced items.
UPI Status
Š
– Press [Enter] to view the UPI status.
Link Frequency Select
Š
– Selects the UPI link frequency.
– Options available: 9.6GB/10.4GB/Auto. Default setting is Auto.
SNC
Š
– Enable/Disable SNC.
– Options available: Disable/Enable/Auto. Default setting is Disable.
Stale AtoS
Š
– Enable/Disable Stale A to S Dir optimization.
– Options available: Disable/Enable/Auto. Default setting is Disable.
LLC dead line alloc
Š
– Enable/Disable LLC dead line alloc.
– Options available: Disable/Enable/Auto. Default setting is Auto.
- 85 - BIOS Setup