Install The Mount - Rand McNally intelliroute TND 720 Quick Start Manual

Install the Mount

NOTE:
Follow all local regulations governing the placement of the mount.
Select an area with a line of sight to the sky and GPS satellites to ensure reliable GPS information.
1. Clean and dry the mounting area.
2. Remove the suction cup protective film.
3. Adjust the angle of the mount using the thumbscrew.
4. Pull the suction cup lever up to release suction.
5. Place and hold the mount suction cup against the mounting surface.
6. Press the suction cup lever down until it snaps into place.
7. Slide the device onto the mount.
8. Plug the power cord into the device and the vehicle's 12-volt power source.
9. Adjust the device so that it can be easily seen and does not block the driver's line of sight.
3