What's Included; Charge The Battery; Install The Mount - Rand McNally TND 525 User Manual

Rand mcnally truckgps user manual
Hide thumbs Also See for TND 525:
Table of Contents

Advertisement

What's Included

Rand McNally IntelliRoute
Windshield mount with suction cup
Quick Start Guide
Vehicle charger
USB cable

Charge the Battery

It is recommended that the device is always
connected to a power source during use.
Note: The vehicle may need to be on for the device to charge.
IntelliRoute
TND
525 User Manual
®
TND
525
®

Install the Mount

Note: Follow all local regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Adjust the angle of the mount using the thumbscrews.
5. Pull the suction cup lever up to release suction.
6. Plug the power cord into the device and the vehicle's 12-volt
power source.
7. Slide the device onto the mount.
8. Place and hold the mount suction cup against the
mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Adjust the device so that it can be easily seen and does not
block the driver's line of sight.
Slide up
to mount
1. Your Device
Thumbscrews
Press down
to hold
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents