Second Stream - Eneo MSR-24N040005A User Manual

Table 4-40 RECORD > Main Stream > Copy Codec Setup Item and Description
No. Name
1
2
3 Select All /Unselect All Select/deselect all channels.
4 Copy Item
5
4.5.3

Second Stream

Second Stream > Analog Camera
To set the image quality and resolution of Second Stream
No. Name
1 CH
2 Resolution
3 Frame Rate
4 Quality
5 Pre-Alarm
6 Post-Alarm
7 Copy Stream
Setup
From Select the channel to be copied.
To Select the channel copied the same content.
Select the stream to be copied.
Copy Select the list to be copied.
Figure 4-39 RECORD > Stream > Second Stream
Table 4-41 RECORD > Stream > Second Stream Item and Description
Display channels.
Set the resolution of video clips (640X480).
Select recording FPS (1-30).
Select image quality (Level 1-8).
Start recording before set time, if event occurs.
Recording after set time until event ends.
Copy main recording image set value to other channels. For more
information about set value copy, see section "4.5.2 Stream > Main Stream
Function
Function