Replacing The Leds - V-ZUG DWPQG Series Operating Instructions Manual

Loosen the activated charcoal filter A from the metal holder E.
Clean the metal holder in a dishwasher or by hand.
Inserting the activated charcoal filters
Fit activated charcoal filters A to the metal holder E.
Push activated charcoal filters A straight upwards until they engage.
– Activated charcoal filters A are located in the side panels.
One by one, push activated charcoal filters B upwards until they engage.
Push metal cover upwards until it engages.
Put back the grease filters.
Connect the appliance to the mains power supply.
With the appliance switched off, depress the
reset the saturation indicator.
– The flashing display goes out.
5.4

Replacing the LEDs

For safety reasons, the LEDs must be replaced by our Customer Services.
E
A
5 Care and maintenance
button for 5 seconds to
23