Table of Contents
Advertisement
5
Care and maintenance
5.1
Cleaning the housing
Take care that no water gets into the housing! If water gets into the
housing, it can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool etc. to
clean the appliance as they can damage the surface.
Remove the screw fuse or switch off the circuit breaker.
Cleaning the outside/inside
Clean the outside using a slightly damp cloth – and detergent if necessary
– and wipe dry.
Grease and condensate water can build up around the grease filters on the
inside.
Clean using a slightly damp cloth – and detergent if necessary – and wipe
dry.
18
Advertisement
Table of Contents
