About The Zre Network Activity Leds - Fortinet FortiGate FortiGate-5001FA2 Introductions Manual

FortiSwitch-5003 module

About the ZRE network activity LEDs

FortiGate-5000 Series Introduction
01-30003-0378-20061207
Table 11: FortiSwitch-5003 module front panel LEDs and switches (Continued)
LED State Description
EXT FLT Off Normal operation.
Yellow Cannot establish a link to a configured interface or another
connection problem external to the FortiSwitch-5003 module.
This LED may indicate issues that do not affect normal
operation.
INT FLT Off Normal operation.
Yellow Failure of internal tests. Indicates a hardware or software
problem with the FortiSwitch-5003 module.
Hot Swap Blue Indicates the FortiSwitch-5003 module is ready to be hot
swapped. During a hot swap, the LED is on. The LED turns off
when the FortiSwitch-5003 module is correctly installed.
Reset Press and hold Reset for three seconds to restart the FortiSwitch-5003
module.
switch
The ZRE network activity LEDs show links and network activity for the interfaces
and connections listed in Table
Figure 11: FortiSwitch-5003 ZRE network activity LEDs
Table 12: ZRE network activity LEDs FortiSwitch-5003 interfaces and connections
ZRE network Interface or connection
activity LED
0 ZRE0 front panel interface.
1 ZRE1 front panel interface.
2 ZRE2 front panel interface.
3 to 14 Base backplane connection to FortiGate-5000 series modules in chassis
slots 3 to 14.
15 Base backplane link. Indicates that the FortiSwitch-5003 module can
connect to the base backplane interface.
12.
Front panel LEDs and connectors
35