Please go to
www.elotouch.com/support
this device.
1
Connect the power adaptor (16:9 model is shown below).
2
Make additional connections from the back of the Touchcomputer.
to verify you have the latest drivers before installing
3
Make additional connections from the bottom of the stand module or the
Touchcomputer.
4
•
Install the security cover for the head only model, and route the cable with cable
management kit.
•
Mount on stand or wall using 75 mm x 75 mm VESA mounting interface for the
head only model.
•
Press the power button to turn on the Touchcomputer.