Page 1
E-Series Touchcomputer User Guide Elo TouchSystems E-Series LCD Multi-function Touchcomputer...
Page 2
TE Connectivity Touch Solutions Elo TouchSystems E-Series Touchcomputer User Guide Multi-function Touchcomputer Revision B SW601671 TE Connectivity Touch Solutions 1-800-ELOTOUCH (1-800-356-8682) www.elotouch.com...
Table of Contents Chapter 1: Setup..................1 Unpacking Your Touchcomputer..................1 Adjusting the Display....................... 2 Calibrating the Touchscreen in Microsoft Windows Operating Systems ......3 Additional Mounting Option for Your System..............4 Chapter 2: Operation ................5 Elo TouchSystems – E-Series Hardware Monitoring Utility..........
C H A P T E R SETUP This chapter discusses how to set up and test your touchcomputer. Unpacking Your Touchcomputer Check that the following items are present and in good condition: Touchcomputer Power cable US/Canada Power cable Europe Wall Mounting Driver CD and Power Adapter...
Adjusting the Display The display screen can be adjusted from -17 to +75 degrees, as shown below. 75° ° +75° -17° To prevent tipping or dropping, be sure to hold the base when CAUTION: adjusting the display. E-Series Touchcomputer User Guide...
Calibrating the Touchscreen in Microsoft Windows Operating Systems The touchscreen is pre-calibrated for accurate touch response. If for any reason the touchscreen needs to be recalibrated, right-click the Elo icon in the Taskbar and then click “Properties.” The following window opens. Click the Align button.
Additional Mounting Option for Your System 1) Mounting on the wall or pole 2) Second monitor mount onto your system (any monitor under 2.5 Kg with 75mm VESA mount) E-Series Touchcomputer User Guide...
C H A P T E R OPERATION This chapter describes how to interact with the Elo TouchSystems diagnostic tool, power LED, and input/output panel. Elo TouchSystems – E-Series Hardware Monitoring Utility How to Install The utility is included in the driver CD. Please go to “E-Series Hardware Monitor” folder located on the driver CD to install the utility.
The Hardware Monitor tool provides the following features. Feature Description System Display the BIOS version, operating system version, memory information, and drive information. Display Adjust brightness. • Brightness: Adjust the backlight of the monitor. Hardware Monitor the CPU temperature, system temperature, and system Monitor output voltages.
Accessing the Input/Output Panel To access the input/output (I/O) ports, remove the I/O cover at the left of the unit. A security screw is included and may be used to secure the front cover to the touchcomputer. Below are the I/O descriptions: Note: As a safety precaution, always leave the I/O cover attached when the system is powered on.
C H A P T E R SAFETY AND MAINTENANCE Safety Important information regarding the proper setup and maintenance of your touchcomputer: • To reduce the risk of electric shock, follow all safety notices and never open the touchcomputer case. •...
Care and Handling The following tips help keep your touchcomputer functioning at the optimal level. To avoid risk of electric shock, do not disassemble the power adapter or display unit cabinet. The unit is not user serviceable. Remember to unplug the display unit from the power outlet before cleaning.
Page 14
UL Directive E-Series touchcomputer has included a lithium battery on the motherboard. There is a risk of explosion if battery is replaced by an incorrect type. Please dispose of used batteries according the region instructions. China RoHS E-Series Touchcomputer User Guide...
C H A P T E R TECHNICAL SUPPORT Technical Assistance There are two methods to obtain contact information for technical assistance on the touchcomputer: • The web • The phone Using the Web For technical support, go to www.elotouch.com/go/contactsupport. For current Elo news, product updates, and announcements, or to register to receive our Touchcomputer newsletter, go to www.elotouch.com/go/news.
REGULATORY INFORMATION I. Electrical Safety Information A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein may result in improper operation, damage to the equipment, invalidation of warranty, or a fire hazard if the requirements are not followed.
Page 17
Technology Equipment (ITE) is required to have a CE Mark on the manufacturer’s label which means that the equipment has been tested to the following Directives and Standards: This equipment has been tested to the requirements for the CE Mark as required by EMC Directive 2004/108/EC indicated in European Standard EN 55022 Class B and the Low Voltage Directive 2006/95/EC as indicated in European Standard EN 60950-1.
Page 18
vii) If you need additional help, consult your dealer, manufacturer, or an experienced radio or television technician. III. Agency Certifications The following certifications have been issued for the touchcomputer: • • • China (CCC) Russia (GOST) • • • Ukraine Belarus (BelGiss) Croatia (KONCAR) (UKSERTCOMPUT...
WARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. With the exception of the negotiated warranty periods; the warranty for the touchcomputer and components of the product is one year.
Page 20
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY. EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, SELLER GRANTS NO OTHER WARRANTIES, EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, THEIR NONINFRINGEMENT, OR OTHERWISE.
www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers • Touch Monitor Newsletter Getting in Touch with TE Touch Solutions To find out more about the extensive range of Elo TouchSystems touch solutions, visit our Website at www.elotouch.com or simply call the office nearest you: North America...