18 COOLING SYSTEM
18.5
120
Refilling with coolant
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
C00744-11
Condition
The motor is cold.
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
p. 69)
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
1
Ensure that the screws
Info
The screws are located under the electric motor and
can be accessed through a recess in the motor guard.
–
Position the motorcycle upright.
–
Pour coolant in up to measurement
Guideline
10 mm (0.39 in)
Coolant
–
Mount the radiator cap.
Finishing work
–
Remove the covering cap. (
–
Install the KTM PowerPack. (
–
Lock the seat. (
p. 69)
–
Go for a short test ride.
–
Check the cooling system for leaks.
–
Check the coolant level. (
p. 43)
p. 107)
p. 71)
2
and
are tightened.
A
above the radiator fins.
0.7 l (0.7 qt.)
Coolant (
p. 71)
p. 108)
p. 118)
p. 137)