13 SERVICE WORK ON THE CHASSIS
13.32
78
402152-01
Checking the rubber grip
401197-01
K00547-10
Main work
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or defor-
mation:
–
Change the swingarm.
Info
A damaged swingarm must always be changed.
Repair of the swingarm is not authorized by
KTM.
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
p. 69)
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve or
the throttle tube.
»
If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
–
Check that screw
1
is firmly seated.
Guideline
Screw, fixed
M4
grip
A
Diamond
must be located at the top.
p. 108)
5 Nm (3.7 lbf ft)
Loctite
®
243™