15 WHEELS, TIRES
15.7
96
400695-01
Checking the spoke tension
Warning
Danger of accidents Incorrectly tensioned spokes impair the handling characteristic and result in sec-
ondary damage.
The spokes break due to being overloaded if they are too tightly tensioned. If the tension in the spokes
is too low, then lateral and radial run-out will form in the wheel. Other spokes will become looser as a
result.
–
Check spoke tension regularly, and in particular on a new vehicle. (Your authorized KTM workshop will
be glad to help.)
400694-01
Main work
–
Remove the protection cap.
–
Check the tire air pressure when the tires are cold.
Tire air pressure, offroad
front
rear
Tire air pressure, road
front
rear
»
If the tire pressure does not meet specifications:
–
Correct the tire pressure.
–
Mount protection cap.
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
p. 69)
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
p. 69)
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
Briefly strike each spoke with the tip of a screwdriver.
Info
The tone frequency depends on the length of the spoke
and the spoke diameter.
If spokes of equal length and diameter vibrate with a
different tone, this is an indication that the spoke ten-
sions differ.
You should hear a high note.
»
If the spoke tension varies:
–
Correct the spoke tension.
–
Check the spoke torque.
0.9 bar (13 psi)
0.7 bar (10 psi)
1.5 bar (22 psi)
1.5 bar (22 psi)
p. 108)
p. 43)
p. 107)
p. 71)