IntesisBox IBOX-BAC-MBRTU-100 User Manual page 13

®
IntesisBox BACnet/IP Server - Modbus RTU Master
 Ethernet: Using the ETH port (Figure 4.1) of IntesisBox. How to check connectivity is
explained in section 4.3.
 Serial cable: To connect the device to the PC the serial cable supplied should be
plugged to the PC console port (Figure 4.1).
The cable is a RS-232 straight cable and its pinout is at explained in Table 4.2.
IntesisBox
DB9 M
TX
RX
GND
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox is a registered trademark of Intesis Software SL
RS-232 (Straight)
2
3
5
Table 4.2 Configuration serial cable pinout
User's Manual r14 eng
PC
DB9 F
2 RX
3 TX
5 GND
URL http://www.intesis.com
Email info@intesis.com
tel +34 938047134
13 / 27