Table of Contents
Advertisement
RRU3942&RRU3642
Installation Guide
Figure 7-28 Top view of the RRU
(1) Angle steel
Procedure
Step 1 Determine a position for installing the mounting bracket.
l
l
Step 2 Loosen the two M10 nuts on the mounting brackets and move the M10x150 bolt out of the trough
on the auxiliary bracket, as shown in
Issue 07 (2013-12-30)
If the RRU must be installed on angle steel secured on a tower, see
Single RRU
to determine a position.
If the RRU must be installed on angle steel secured on the ground, see
determine a position.
Figure 7-29 Distance between the mounting bracket and the ground
NOTE
It is recommended that the mounting bracket be 1,200 mm (47.24 in.) to 1,600 mm (62.99 in.) above
the ground.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
7-30.
7 Installing the RRU
3.5.1 Clearance for a
Figure 7-29
to
69
Advertisement
Table of Contents
